Hi,
OP-16BIT-104 adds an additional 40-way next to the 64-way header to
provide a '16-bit PC/104' slot, although all the signals are not
present. If you are making your own PC/104 card then the 16-bit
signals are all present without this connector, but it may be needed
for other manufacturers boards - for the cost I'd get it.
OP-STHRU-64 and OP-STHRU-1024 are the same as the default 64 and 104
pint PC/104 headers, but also extend the pins some distance BELOW the
main PCB to allow boards to be stacked underneath. Unless you need
this facility (which is incompatible with the enclosures) I'd pass.
Hope this helps,
PJE
--- In "HOSAM YOUSIF" <> wrote:
>
> when i want to buy ont ts-7250 from technologic systems company
> ,they offer 3 addational options on it (fo pc/104 bus) this 3
options is:
> OP-16BIT-104
> OP-STHRU-64
> OP-STHRU-104
> please any one can give me any information about this send to me
> because i don't know it???
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|