Hi,
I see that my /proc/bus/usb/devices is missing. Perhaps that the
cause?
I have so far only run loadUSBModules.sh to access by USB devices
I have also tried to mount the filesystem:
/dev/root on / type yaffs2 (rw)
none on /dev type devfs (rw)
/proc on /proc type proc (rw)
/proc/bus/usb on /flash type usbdevfs (rw)
But still /proc/bus/usb contains no "devices"..
Something else I have to do?
/ Hakan
--- In "Baschieri Francesco"
<> wrote:
>
> Hi,
>
> I'm facing the following problem on a TS-7200 board. The board is
> equipped with the standard TS-linux release and by loading the
proper
> modules I'm able to use a single bluetooth dongle.
>
> But when I plug another dongle into the 2nd USB port I'm unable do
make
> it work.
>
> The only way to bring it up is to make
>
> hciconfig hci0 down
>
> and then
> hciconfig hci1 up
>
> and then it works.
>
> But I'm only able to operate a single BT dongle at a time. On my
> development machine (laptop) everything works fine.
>
> Anyone facing the same problem?
>
> Tanks in advance
> Francesco
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|