sorry, that should read 'writing a hotplug script'...
Christopher Friedt wrote:
> Are you using a USB wlan device ?
>
> I would highly suggest writing a script with busybox to insert a proper
> module when the device is detected, and then run whatever script is
> necessary.
>
> ~/Chris
>
> domniveust wrote:
>> At least that's my problem. I've edited the S10 Network file with the
>> following.
>>
>>
>> ifconfig ${DEVICE} ${IPADDR} netmask ${NETMASK} broadcast
>> ${BROADCAST} up
>> if test "$DEVICE" = "wlan0" ; then
>> iwconfig wlan0 essid ${ESSID}
>> ifconfig eth0 down
>> fi
>>
>> I've setup ifcfg-wlan0. During boot I get..
>>
>> Bringing up interface wlan0..
>> SIOCSIFADDR: No such device
>> SIOCSIFNETMASK: No such device
>> SIOCSIFBRDADDR: No such device
>> SIOCGIFFLAGS: No such device
>> Error for wireless request "Set ESSID" (8B1A) :
>> SET failed on device wlan0 ; No such device.
>> setting kernel IP routing tables
>>
>> Once I log into Busybox, I can execute:
>>
>> ifconfig wlan0 192.168.1.220 netmask 255.255.255.0 broadcast
>> 192.168.1.255 up
>> iwconfig wlan0 essid AP_main
>>
>> and it loads fine.
>>
>> Any ideas?
>>
>>
>>
>>
>>
>>
>> Yahoo! Groups Links
>>
>>
>>
>>
>>
>>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|