Re: [ts-7000] TCPIP program

["Don W. Carr" <>]

You have to tell us what you need to do. There are many standard protocols that require no programming, such as ftp for transfering files, but you will likely need to write custom programs that use sockets in C to run on the SBC, then communicate via the PC using sockets. You should forget using Visual Basic and also consider running Linux on the PC. Don.

On 10/31/06, thomas <> wrote:

My ts7300 is used to control a robot. I had connected a wireless lan
card to the ts7300. need help.

I want the robot to be controlled through PC using wireless LAN,
program written in visual basic.

now. how do i program the ts7300 to communicate with the PC using
tcpip.

regards
thomas

-- 
Dr. Don W. Carr
J. G. Montenegro 2258
Guadalajara, Mexico
+52-333-630-0704
+52-333-836-4500 ext 2930

__._,_.___

SPONSORED LINKS

Single board computer	Hardware	Computer running slow
Linux os	Single board

Your email settings: Individual Email|Traditional
Change settings via the Web (Yahoo! ID required)
Change settings via email: =Email Delivery: Digest | m("yahoogroups.com?subject","ts-7000-fullfeatured");=Change Delivery Format: Fully Featured">Switch to Fully Featured
Visit Your Group | Yahoo! Groups Terms of Use | =Unsubscribe

__,_._,___