Is there some way to dual-boot a ts7xx0 board?
I have a TS7200 that we're using for development; we're in the final
stages of getting the prototype ready but there are still tweaks going
on in the codebase.
It would be nice to be able to select a configuration during
redboot... similar to grub or lilo.
For now, we will boot from the CF card, but right now we're
netbooting. And for demo purposes, it would be nice to be able to
tweak a configuration for a customer, netboot the board to check it
out, and then transfer it to the CF card - rather than crash the
system on the CF card due to a hosed config.
--Yan
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|