[ts-7000] Re: More problems with the Ts-Eth10 card

["Robert Wasniak" <>]

i install the module cs89x0.o
and then,

$ifconfig eth0 down
$ifconfig eth1 down
$ifconfig eth1 up
>eth1: using half-duplex 100Base-T (RJ-45)
$ifconfig -a
>eth1     Link encap:Ethernet HWaddr 00:D0:69:40:55:47
>          inet addr:192.168.0.51 Bcast:192.168.0.255 Mask
..........
>          Interupt:33 Base adress: 0x300
..........
>lo .......
so i have eth1 up and only eth1 up....

then i:
$ping 192.168.0.5
>NETDEV WATCHDOG: eth1: transmit timed out
>NETDEV WATCHDOG: eth1: transmit timed out
>NETDEV WATCHDOG: eth1: transmit timed out
>NETDEV WATCHDOG: eth1: transmit timed out
>NETDEV WATCHDOG: eth1: transmit timed out
.....



--- In  "Eddie Dawydiuk" <> wrote:
>
> Hello,
> 
> > I get these messages to pop up when trying to use the 104 card
> > NETDEV WATCHDOG: eth1: transmit timed out
> 
> Please provide the output of dmesg after you see this error. 
Please tell
> us what you were doing prior to this error.
> 
> //Eddie
>






 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/