hello marco,
ok for the load and exec on redboot script, but the load given in
example are from tftp, http or serial.
as there is the vmlinux image in flash at 0x00218000, I can't
understand this difference.
--- In Marco Pracucci <> wrote:
>
> Hi David,
>
> you can configure redboot using "fconfig" command on redboot console. In
> particular, you should add a "load" command and then an "exec" command
> at the boot script.
>
> Marco Pracucci
>
> > ok, in fact :
> > fis load vmlinux -b 0x00218000
> > and
> > exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
> > gives me back the TS linux.
> > but, not automaticaly within the redboot script at start.
> > I don't understand as it is the script that where before.
> >
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|