ok, in fact :
fis load vmlinux -b 0x00218000
and
exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
gives me back the TS linux.
but, not automaticaly within the redboot script at start.
I don't understand as it is the script that where before.
--- In Petr Stetiar <> wrote:
>
> david.lewin <> [2006-10-09 18:23:29]:
>
> > Hello the group,
> >
> > I'm new here and also with the TS 7260.
> >
> > ALthough I've read messages and docs, I have a simple question :
> >
> > the redboot script does not work anymore when I type :
> > exec -c "console=ttyAM0,115200 ip=dhcp root=/dev/mtdblock1"
> > for the redboot script, this give me a :
> > "Can't execute linux invalid address"
>
> You need to 'load' linux first into ram and then you can 'exec' it.
Something
> like this:
>
> load -v -r -b 0x00218000 -m http -h 192.168.0.1 /zImage
> exec -c "console=ttyAM0,115200 ip=dhcp root=/dev/mtdblock1"
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|