Problem solved.
I found the right option for fconfig. fconfig -i allows me to set the
MAC address.
Regards,
Richard
--- In "Richard Williams" <> wrote:
>
> I have some how managed to delete the MAC address from my board. I
> know what it used to be set to, but I don't know how to set it. Other
> configuration data is deleted too (see redboot messages below).
>
> Now fconfig only allows me to set the boot script. I cannot set the IP
> address etc.
>
> Any ideas on how to fix this?
>
> Regards,
> Richard
>
>
>
> >> Copyright (C) 2005, Technologic Systems
> >> TS-7250: Rev E0 CPU, Rev B PLD, 64MB SDRAM, options ( MAX197-ADC )
>
> +Request for config value 'boot_script_timeout' - wrong type
>
> Failed to get ep93xx_esa
> Ethernet eth0: MAC address 00:00:00:00:00:00
> IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
> Default server: 0.0.0.0
>
> RedBoot(tm) bootstrap and debug environment [ROMRAM]
> Non-certified release, version current-TS_5 - built 16:49:40, Mar 1
2005
>
> Platform: TS-7250 Board (ARM920T) Rev A
> Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
>
> RAM: 0x00000000-0x02000000, [0x00051570-0x01ff9000] available
> FLASH: 0x60000000 - 0x68000000, 8192 blocks of 0x00004000 bytes each.
> == Executing boot script in 1.000 seconds - enter ^C to abort
> RedBoot> load -r -b 0x00218000 -h 10.0.0.201 zImage
> Using default protocol (TFTP)
> TFTP timed out 1/15
> Can't load 'zImage': operation timed out
> RedBoot>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|