I have some how managed to delete the MAC address from my board. I
know what it used to be set to, but I don't know how to set it. Other
configuration data is deleted too (see redboot messages below).
Now fconfig only allows me to set the boot script. I cannot set the IP
address etc.
Any ideas on how to fix this?
Regards,
Richard
>> Copyright (C) 2005, Technologic Systems
>> TS-7250: Rev E0 CPU, Rev B PLD, 64MB SDRAM, options ( MAX197-ADC )
+Request for config value 'boot_script_timeout' - wrong type
Failed to get ep93xx_esa
Ethernet eth0: MAC address 00:00:00:00:00:00
IP: 0.0.0.0/255.255.255.0, Gateway: 0.0.0.0
Default server: 0.0.0.0
RedBoot(tm) bootstrap and debug environment [ROMRAM]
Non-certified release, version current-TS_5 - built 16:49:40, Mar 1 2005
Platform: TS-7250 Board (ARM920T) Rev A
Copyright (C) 2000, 2001, 2002, 2003, 2004 Red Hat, Inc.
RAM: 0x00000000-0x02000000, [0x00051570-0x01ff9000] available
FLASH: 0x60000000 - 0x68000000, 8192 blocks of 0x00004000 bytes each.
== Executing boot script in 1.000 seconds - enter ^C to abort
RedBoot> load -r -b 0x00218000 -h 10.0.0.201 zImage
Using default protocol (TFTP)
TFTP timed out 1/15
Can't load 'zImage': operation timed out
RedBoot>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/ts-7000/join
(Yahoo! ID required)
<*> To change settings via email:
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|