[ts-7000] TS-7400 and serial port with RTS/CTS

To:
Subject:	[ts-7000] TS-7400 and serial port with RTS/CTS
From:	Daniel Smolik <>
Date:	Sun, 01 Oct 2006 23:42:05 +0200

Hi,
I look to TS-7400 schematic and I am not 100% sure that this board support 
serial port with HW handshaking. Have anybody better info ?


                        Thanks
                                        Dan


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/ts-7000/join
    (Yahoo! ID required)

<*> To change settings via email:
     
    

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] TS-7400 and serial port with RTS/CTS, Daniel Smolik <=

Previous by Date:	Re: [ts-7000] rebooting the ts7200, chris dewbery
Next by Date:	Re: [ts-7000] kernel & tick, Jim Jackson
Previous by Thread:	Re: [ts-7000] rebooting the ts7200, chris dewbery
Next by Thread:	Re: [ts-7000] kernel & tick, Jim Jackson
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU