To: | |
---|---|
Subject: | [ts-7000] Complete Memory/Register Map for TS-7300? |
From: | "Aaron Miller" <> |
Date: | Wed, 13 Sep 2006 17:39:59 -0000 |
Hi folks, I have been studying through the memory map and register map at the back of the TS7300 manual and it seems that some things are missing. For example, a recent message stated that bits 0-2 of register 0x8084_0044 is used for powering down the ethernet controller. I would also like to power down the USB controller by software, but I can't seem to find that information anywhere either. Am I missing something? If so, point me in the right direction... Thanks, Aaron Miller Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> Your email settings: Individual Email | Traditional <*> To change settings online go to: http://groups.yahoo.com/group/ts-7000/join (Yahoo! ID required) <*> To change settings via email: <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] Re: Memory leak?, Jesse Off |
---|---|
Next by Date: | Re: [ts-7000] size and byte order of ints, Markus Peuhkuri |
Previous by Thread: | [ts-7000] size and byte order of ints, Yan Seiner |
Next by Thread: | Re: [ts-7000] Complete Memory/Register Map for TS-7300?, John-Mark Gurney |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU