Hi Dave,
--- In Dave Cramer <> wrote:
>
> 1) how do you copy a sd card from one to another
>
> dd if=/dev/sdcard0/disc0 of=/dev/sdcard1/disc0 fails
>
Check ouut: http://www.seiner.com/ts7000/index.php/
Copying%20Boot%20SDCard
This lists how to copy the SD boot card to the other slot (and expand
it to use a larger device). basically the command I use is:
dd if=/dev/sdcard0/disc0/disc of=/dev/sdcard1/disc0/disc bs=1M
> 2) Is there documentation as to the partition types and what is
there ?
There is some information on the Technologic System website regarding
the partition structure on:
http://www.embeddedarm.com/epc/fastboot.htm
I've read more information on the partition arrangement on this
message board (I think) - try doing a search.
> 3) trying to bring up the network without booting into the debian
> flash results in an error since the flash is still mounted read
only
I've not yet tried the fast boot (I was awaiting a fresh SD card),
but will check it out next week as I've generated a new fast boot SD
card.
Regards,
PJE
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|