| To: | |
|---|---|
| Subject: | Re: [ts-7000] Using COM1 and COM2 in TS7260 |
| From: | Joe Bouchard <> |
| Date: | Thu, 31 Aug 2006 09:28:09 -0400 |
On Wed, Aug 30, 2006 at 09:58:38PM -0700, Damith Wijewardhana wrote:
> I'm having a TS7260 board and using it for work with several IO devices. So i
> need to use COM1(ttyAM0) and COM2(ttyAM1). although I try to remove the
> console by arranging jumpers as shown in manual, it doesn't work.
> Always console is appiring on COM1 and COM2. Anyone who use these ports for
> there applications? I need to use them in BR9600.
Comment out the getty lines in /etc/inittab to stop the console from appearing,
then "kill -HUP 1" to make init re-read /etc/inittab
Good luck,
Joe
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Using COM1 and COM2 in TS7260, Damith Wijewardhana |
|---|---|
| Previous by Thread: | [ts-7000] Using COM1 and COM2 in TS7260, Damith Wijewardhana |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU