[ts-7000] Using COM1 and COM2 in TS7260

To:
Subject:	[ts-7000] Using COM1 and COM2 in TS7260
From:	Damith Wijewardhana <>
Date:	Wed, 30 Aug 2006 21:58:38 -0700 (PDT)

I'm having a TS7260 board and using it for work with several IO devices. So i need to use COM1(ttyAM0) and COM2(ttyAM1). although I try to remove the console by arranging jumpers as shown in manual, it doesn't work.
Always console is appiring on COM1 and COM2. Anyone who use these ports for there applications? I need to use them in BR9600.

Thanks
Damith

__._,_.___

SPONSORED LINKS

`Single board computer`	`Hardware`	`Computer running slow`
`Linux os`	`Single board`

YAHOO! GROUPS LINKS

Visit your group "ts-7000" on the web.
To unsubscribe from this group, send an email to: =Unsubscribe
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

__,_._,___

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Using COM1 and COM2 in TS7260, Damith Wijewardhana <= Re: [ts-7000] Using COM1 and COM2 in TS7260, Joe Bouchard

Previous by Date:	[ts-7000] USB on TS7250?, naturalwatt
Next by Date:	Re: [ts-7000] Using COM1 and COM2 in TS7260, Joe Bouchard
Previous by Thread:	[ts-7000] USB on TS7250?, naturalwatt
Next by Thread:	Re: [ts-7000] Using COM1 and COM2 in TS7260, Joe Bouchard
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU