On Thu, 31 Aug 2006, Kulendra Janaka wrote:
> Recently we bought a TS 7260 board and have faced a problem in using its
> serial ports. The COM1 or the ttyAM0 is the terminal output and it works
> fine as described in documentation. The problem is with regards to ttyAM1,
> the terminal appears in the ttyAM1 as well and we have been unable to use it
> for any other purpose because of this. Is there anyone else who faced the
> same problem? Any known workarounds?
>
This must be the number one FAQ as a searc hof past posts here would have
found.
If you do not want the getty process running on com2/ttyAM1 then configure
/etc/inittab to stop it. Look for the line that initiates getty on the
line and comment it out with a '#'. Then kick the init process, kill -1 1
should work.
With nothing else using the port it should be free for other application!
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|