Hi,
I am having problems with the tsuart serial ports on a TS-7260 with
the opt2ttlcom option, with kernel 2.4.26-ts9 (supplied with the
board) and the default mtd filesystem.
I have cross-compiled microcom (a small terminal emulator) to access
/dev/ttyTS1 at 9600,N,8,1 however, when I access the port I get a
console message :
tsuart:change_speed port 1: 9600 bad
and nothing is transmitted/received...
So I compiled the ts-11 kernel and included the tsuart modules into
the kernel (not as modules), and tried again. This time with the ts11
kernel, there is no console message, but at 9600,N,8,1 approx 1 in 3
receive characters are corrupted. If I send single chars to
/dev/ttyTS1 then they are usually received ok, but if I send a string,
eg "0123456789" then most characters are randomly corrupted.
The /dev/ttyAM0, /dev/ttyAM1 ports work fine. It is only the
/dev/ttyTS1 - 3 ports which are faulty.
Any ideas?
Kym
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|