Hello,
I am hoping to find out if it is possible to increase the timing
resolution on a TS-7250/7260 for a sampling application. I am
currently using gettimeofday(), which has a current minimum of 10
milliseconds.
I came across a patch that allowed the kernel clock tick on a TS-7250
to be increased from 100 Hz to 1024 Hz. I do not recall the exact
documentation but the general comment was that it was "at your own
risk".
Does anyone have any comments or experience relating to problems when
the basic clock rate is increased?
Best regards
Roy
------------------------ Yahoo! Groups Sponsor --------------------~-->
Yahoo! Groups gets a make over. See the new email design.
http://us.click.yahoo.com/XISQkA/lOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|