Yeah, I was unsure about the same thing and asked about it a while
ago. According to: http://groups.yahoo.com/group/ts-
7000/message/3006 , with the SD card option DIO2 is the SD card
signals.
Pat
--- In "Airor" <> wrote:
>
> The documentation in ts-7260-manual-rev1.1.pdf is unclear about
using the
> DIO2 pins as gpio when you have the SD card option.
>
> Page 33 states: "when the additional 4th and 5th UART ports are off
(MODE
> register is 7), the DIO2 Header pins dedicated to COM4 and COM5 are
GPIO
> pins."
>
> There is no indication what register the MODE register is.
>
> Or am I to understand that DIO2 is unavailable with the SD card
option?
>
> Thanks,
>
> Mike Magee
> Remtrol Inc.
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Something is new at Yahoo! Groups. Check out the enhanced email design.
http://us.click.yahoo.com/SISQkA/gOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|