| To: | |
|---|---|
| Subject: | [ts-7000] TS-7260 DIO2 with SD card option |
| From: | "Airor" <> |
| Date: | Tue, 18 Jul 2006 13:46:41 -0700 (PDT) |
The documentation in ts-7260-manual-rev1.1.pdf is unclear about using the
DIO2 pins as gpio when you have the SD card option.
Page 33 states: "when the additional 4th and 5th UART ports are off (MODE
register is 7), the DIO2 Header pins dedicated to COM4 and COM5 are GPIO
pins."
There is no indication what register the MODE register is.
Or am I to understand that DIO2 is unavailable with the SD card option?
Thanks,
Mike Magee
Remtrol Inc.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Revised: new GNU openhardware ep9302 based SBC, uhmgawa |
|---|---|
| Next by Date: | [ts-7000] Revised: new GNU openhardware ep9302 based SBC, uhmgawa |
| Previous by Thread: | [ts-7000] Revised: new GNU openhardware ep9302 based SBC, uhmgawa |
| Next by Thread: | [ts-7000] Re: TS-7260 DIO2 with SD card option, pdaderko |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU