| To: | |
|---|---|
| Subject: | Re: [ts-7000] TS-7300 Noob Questions |
| From: | "Michael Schmidt" <> |
| Date: | Thu, 13 Jul 2006 14:09:14 -0700 |
> > Also, the manual does not indicate which pin does what function for > the quad counter. Any ideas? Which pin is chan a, b, index, etc. > DIO6 and DIO7 are the quadrature counter pins. DIO5 is the index pin. On page 35 of the TS-7300 manual (http://www.embeddedarm.com/Manuals/ts-7300-manual-rev1.1.pdf) there is a diagram showing the relationship of the DIO pin names (e.g. DIO5) to actual pins on the DIO header. This url might be helpful to you in programming the XDIO pins: http://www.embeddedarm.com/epc/xdio.htm > Thanks, > Ira > Regards, Michael Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/ts-7000/ <*> To unsubscribe from this group, send an email to: <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/ |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Reading GPIO ports, Matt Godbolt |
|---|---|
| Next by Date: | Re: [ts-7000] TS-7300 Noob Questions, Ira Hoffman |
| Previous by Thread: | [ts-7000] TS-7300 Noob Questions, drrock77 |
| Next by Thread: | Re: [ts-7000] TS-7300 Noob Questions, Ira Hoffman |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU