[ts-7000] 93C86 eeprom

[Matthieu Crapet <>]

Hi,

I have a 93C86 DIL8 ship (8K/16K 5.0V Microwire Serial EEPROM).
The datasheet : http://www.ortodoxism.ro/datasheets/microchip/21132d.pdf

If this possible to interface with TS-7200 SSP ?
There are two issues:
- It is said "microwire", the EP9301 user guide says that microwire inputs 8
  bits only, I need 13 or 14 bits for commands (adress is 10 or 11 bits).
- With SPI mode, it is not possible to input and output a different
  size. In my case I need: 13 or 14 bits for input, and 8 or 16 bits for 
output.

I looked at the TMP124, input (command=0x8000) and output are both 16 bits.

Is there a solution ?

Matthieu


------------------------ Yahoo! Groups Sponsor --------------------~--> 
See what's inside the new Yahoo! Groups email.
http://us.click.yahoo.com/2pRQfA/bOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/