Yan,
The below is from one of your previous posts so it looks like 0x11e00000
Re: TS-SER4 membase address?
... Got it. 0x11e00000 ....
Also be sure you have the right COMx jumper set for 0x230. (COM1, COM2, or
COM4).
MGS
---- Yan Seiner <> wrote:
> I have a favor from the group. I am on the road with my TS7200, and my
> TS-SER4 (the 4 port serial card) isn't working....
>
> I suspect that somewhere I have messed up my serial setup in the code.
>
> Could someone please post the base memory address and the base register
> for the TS-SER4?
>
> I am using 0x11e0 0000 as the base mem and 0x230 as the TS-SER4 control
> register offset. I've searched through the docs on the website and I
> can't find that information anywhere...
>
> TIA,
>
> --Yan
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Great things are happening at Yahoo! Groups. See the new email design.
http://us.click.yahoo.com/TISQkA/hOaOAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|