--- In "Mark Carlson" <> wrote:
>
> On 5/12/06, psych2009 <> wrote:
> > I am going to be connecting a USB-RS232 adapter to the board. Though
> > I am not sure how to open the port in C or how to comunicate with the
> > board.
>
> If you can use the device in Linux, it will create a file in /dev that
> you can use exactly the same as a regular serial port. Thats pretty
> much it.
>
> This page has more info:
> http://www.easysw.com/~mike/serial/serial.html
>
> -Mark
>
I am unsure which device it is named, and I have attemped
communicating with the board through COM1 instead of the USB though I
was unable to send any data.
Would n = write(fd, "ATZ\r", 4); just output ATZ to the screen?
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get to your groups with one click. Know instantly when new email arrives
http://us.click.yahoo.com/.7bhrC/MGxNAA/yQLSAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|