| To: | <> |
|---|---|
| Subject: | [ts-7000] TS-7250, USB ports |
| From: | <> |
| Date: | Wed, 5 Apr 2006 08:12:53 -0700 |
During bootup of Linux on a TS-7250, this message implies that there are 3
USB ports:
hub.c: USB hub found
hub.c: 3 ports detected
The specs for the TS-7250 say '2' but that could mean that only 2 are
exposed. Specs for the EP9302 also say '2' but maybe there's a hub on the
board. I didn't notice a 3rd port on the schematic but I could have missed
it. Is there a 3rd port maybe exposed on an on-board header?
-Jim
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | OT: Re: [ts-7000] Re: apis for lcd display and keypad, Mark Carlson |
|---|---|
| Next by Date: | Re: [ts-7000] Re: apis for lcd display and keypad, Don W. Carr |
| Previous by Thread: | OT: Re: [ts-7000] Re: apis for lcd display and keypad, Mark Carlson |
| Next by Thread: | Re: [ts-7000] TS-7250, USB ports, Lennert Buytenhek |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU