| To: | |
|---|---|
| Subject: | [ts-7000] Re: loading a modified redboot |
| From: | "blaisestag" <> |
| Date: | Fri, 03 Mar 2006 01:34:27 -0000 |
The documentation you refered to was actually in the redboot manual,
so I think I have a clear idea how to do it now. the old rtfm... I
just need to know which one to read.
Thanks again.
--- In Bob Lees <> wrote:
>
> No That's Curt's.
>
> We have reprogrammed redboot using tftp and following the guidelines
in the
> Technologics doco
>
> Bob
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [ts-7000] Re: processor clk control, cpld programming, Curtis Monroe |
|---|---|
| Next by Date: | [ts-7000] TS-ISO485 Half Duplex - Working C Code Example Request, J |
| Previous by Thread: | Re: [ts-7000] Re: loading a modified redboot, Bob Lees |
| Next by Thread: | Re: [ts-7000] SPI interface to additional device, Curtis Monroe |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU