To: | |
---|---|
Subject: | [ts-7000] TLV5616 |
From: | BALKRISHNA DARJI <> |
Date: | Fri, 10 Feb 2006 23:23:40 -0800 (PST) |
Hi all, functioning of tlv5616. --the datasheets mentions that the bandwidth of the chip is 20khz so I am assuming that I can use it for voice applications.. --the chip does have transmit and receive buffers.. --the clocking is provided by the input clock signal whose frequency to it is divided by values stored in two registers on the chip, these registers are programmable -- I was not talking about an interrupt generated sampling?.. --I wanted to know that since I am using a Serial Pheripheral Interface what should be the clock frequency to it and how can I provide it(a crystal or what??) --what is the frequency available at the SPI_CLK pin?. Good bye, //Balkrishna
Yahoo! Autos. Looking for a sweet ride? Get pricing, reviews, & more on new and used cars.
SPONSORED LINKS
YAHOO! GROUPS LINKS
|
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | [ts-7000] ISA_OSC frequency?, Rich Wilson |
---|---|
Next by Date: | [ts-7000] Re: ISA_OSC frequency?, Jesse Off |
Previous by Thread: | [ts-7000] ISA_OSC frequency?, Rich Wilson |
Next by Thread: | [ts-7000] Slow boot time --> How can one speed up the booting process?, Steve Hier |
Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU