Hi,
Has anyone tried 'Advanced Power Management' on the TS7200?
My application of the TS7200 is a data acquisition system wherein data
acquisition is every 3 hours and the acquisition process takes just 30
to 35 mins. So for roughly 2 hrs, the TS7200 is consuming power
without really doing any work. I want to put the unit in an 'low
power' mode (the ep9302 has support for this but how do I do it from
Linux?) during the 2.5 hr break between data acquisition cylcles.
Any ideas on how I can acheive it?
I went through the linux literature and found 'apm' (basically for
laptops), but would it work on the TS7200 (if I compiled it for TS7200)?
Thanks and with regards,
- Nagi
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|