Hi,
Thanks i ve already did that but the problem is that i am not
familiar with how to deal with the serial port in general for reading
and writing. i read some sample codes from the net but they are too
complex.
yours,,,
--- In Dave Cramer <> wrote:
>
> Hi,
>
> You are aware that the 7000 ships with com2 enabled as a login. In
> order to use it for anything else you need to disable this
>
> comment out the section in /etc/inittab
>
> dave
> On 7-Dec-05, at 8:04 AM, ashraf_abussaud wrote:
>
> > Hi All,,,,
> >
> >
> > I want to ask if any one can tell me how to write a simple test C Code
> > that will read an write from and into COM2. Assume that COM2 is
> > connected into amother computer that will read your data wait for 2
> > seconds and send it back to the KIT throught the same COM2.
> >
> > Best regards,,,,
> >
> >
> >
> >
> >
> > ------------------------ Yahoo! Groups Sponsor --------------------
> > ~-->
> > AIDS in India: A "lurking bomb." Click and help stop AIDS now.
> > http://us.click.yahoo.com/9QUssC/lzNLAA/TtwFAA/CFFolB/TM
> > --------------------------------------------------------------------
> > ~->
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
1.2 million kids a year are victims of human trafficking. Stop slavery.
http://us.click.yahoo.com/.QUssC/izNLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|