You'll absolutely need the Cirrus Logic Data Sheets for this. Although
there may be a link on some of the technologic stuff, you should
probably just google it: EP9301
--Andy
On Thu, 1 Dec 2005 5:56 pm, Yan Seiner wrote:
> --- In Andy Gryc <> wrote:
>>
>> If there's a question I can answer let me know.
>> --Andy
>
> Andy:
>
> Here's what I am trying to do (at least for now):
>
> 1. pick a GPIO pin
> 2. set it up so that an interrupt is raised on both leading and
> trailing edge
> 3. log the time and type of each interrupt
>
> I am not clear from your example code how to do 2. I don't understand
> what the various registers are used for, and how to use them, and I
> can't find any documentation for that.
>
> The greater issue is that I need 5V TTL logic so I need a memory map
> for the K7V video board with the registers laid out....
>
> Thanks,
>
> --Yan
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
--Andy Gryc
http://gryc.ws
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/KIlPFB/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|