Hi Tom,
> I am using ts7200_config, when I said default config, I was refering
> to TS default config. After comparing ep93xx_eth.c in ts6 and ts8 I
> found that macro GET_MAC_ADDR was changed and this caused it to fail
> compilation. I simply coppied old ts6 version of ep93xx_eth.c to my
> ts8 source tree and then I succeded to compile the ts8 kernel and
> make zImage. And it boots OK.
When you load the new kernel do you have a valid MAC address? Gcc 2.95
is the reccomended compiler, I would make sure you set your compiler
to gcc-2.95 if you are compiling a kernel natively...
//Eddie
> --- In "Eddie Dawydiuk" <> wrote:
>>
>> Hello,
>>
>>> I found people had the same problem before in the group, but
> didn't
>>> see the solution. So, does anybody now how to solve following
> problem:
>>>
>>> I am compiling linux24_ts8_src.tar.gz with the default .config
> file
>>> directly on my TS7200 running Debian. And I get following error:
>>
>> Don't use the default .config file instead use the following
> commands
>> to load the correct .config file.
>>
>> make ts7200_config
>> make oldconfig
>> ...
>>
>>
>> //Eddie
>>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|