> Hi Michal,
>
> I'm suffering the same problems when connecting a modem. Did you ever
> resolve this issue?
I resolved it. The problem was: the modem had been connected to port
number one. Sometime log/debug messages are sent from the system
directly to console (which is redirected to serial 1).
First you have to change file: /etc/inittab by commenting the line:
lgn1:12345:respawn:/sbin/getty -L 115200 ttyAM1
The second problem is: main busybox console is also redirected to
serial 1. Even IF YOU TURN OFF serial1 redirection in innittab!!!
You have to (during starting) connect via null modem cable and change
fconfig data.
Now you have probably something like:
exec -c "console=ttyAM0,115200 root=/dev/mtdblock1"
Change it to:
exec -c "console=ttyAM1,115200 root=/dev/mtdblock1" (or even ttyAM2)
And change the JP2 jumper to off.
But remember - now the console messages and connection is turned off.
It resolves all problems with modem...
Best regards
Alus
------------------------ Yahoo! Groups Sponsor --------------------~-->
Most low income households are not online. Help bridge the digital divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|