I'm trying to use a RTC clock board (with M48T86PC1) with the
TS-7200, but Linux doesn't seem to recognize it.
I have successfully written some low level userland code to access
registers (using memory locations supplied by TS), and I can modify
and watch the registers okay. But I don't know how to access the RTC
through the regular Linux time functions (all I get is time based on
the default CPU timer). Is this possible?
How do I set the time, other than at a low level, a byte at a time?
Thanks in advance!
Henry
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|