[ts-7000] Changing command ports?

To:
Subject:	[ts-7000] Changing command ports?
From:	"ld_ts7200" <>
Date:	Wed, 12 Oct 2005 13:38:37 -0000

Hi Everyone,

How easy is it to switch the serial comm port used as the command line
interface

I need to free up the main serial port to connect a modem (with
hardware flowcontrol).

I'm using TS7200 with the Debian compact flash build.

Many thanks

Lee





------------------------ Yahoo! Groups Sponsor --------------------~--> 
Fair play? Video games influencing politics. Click and talk back!
http://us.click.yahoo.com/T8sf5C/tzNLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] Changing command ports?, ld_ts7200 <= [ts-7000] Re: Changing command ports?, ld_ts7200

Previous by Date:	[ts-7000] webcam driver & v4l (Video 4 linux), Omar Rihani
Next by Date:	[ts-7000] Re: How to use tmpfs on TS-Linux?, Mike Dodd
Previous by Thread:	[ts-7000] TS-7200 with ABA Card Reader, cfzaustin
Next by Thread:	[ts-7000] Re: Changing command ports?, ld_ts7200
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU