2005/9/12, <>:
> Dear all,
>
> I'm using TS7250 with onboard 128MB Nand Flash.
>
> When i'm running from nand flash, i get this kernel warning as follows:
>
> ***********
> Searching for NAND flash...
> NAND device: Manufacturer ID: 0x20, Chip ID: 0x79 (ST Micro NAND 128MiB
> 3,3V 8-bit)
> Scanning device for bad blocks
> Bad eraseblock 245 at 0x003d4000
> Bad eraseblock 279 at 0x0045c000
> Bad eraseblock 281 at 0x00464000
> ***********
Just FYI, I also ran into this problem... Actually I have *many* more
"Bad eraseblocks" warnings. I've searched the internet a lot on how to
fix it, but I couldn't find either. I read it somewhere it *could* be
related to the yaffs2 filesystem on the NAND flash, but I'm not sure
about this.
Regards,
Adriano
--
Adriano Winter Bess
awbess <at> gmail <dot> com
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get Bzzzy! (real tools to help you find a job). Welcome to the Sweet Life.
http://us.click.yahoo.com/A77XvD/vlQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|