Dear all,
I'm using TS7250 with onboard 128MB Nand Flash.
When i'm running from nand flash, i get this kernel warning as follows:
***********
Searching for NAND flash...
NAND device: Manufacturer ID: 0x20, Chip ID: 0x79 (ST Micro NAND 128MiB
3,3V 8-bit)
Scanning device for bad blocks
Bad eraseblock 245 at 0x003d4000
Bad eraseblock 279 at 0x0045c000
Bad eraseblock 281 at 0x00464000
***********
i've been searching over internet to find tools or tips to overcome this,
but i got none.
Is there any tool to repair this? Can badblock on the flash be
removed/recovered?
I'll thank for any helps and tips:)
-eko didik widianto
------------------------ Yahoo! Groups Sponsor --------------------~-->
Most low income households are not online. Help bridge the digital divide today!
http://us.click.yahoo.com/cd_AJB/QnQLAA/TtwFAA/CFFolB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|