Hi all,
Forgive me if this is too much of a newbie qs, but...
I v recently purchased a TS-7200 board. All fine, except that I seem
unable to mount a USB stick (SanDisk 256MB). Looking at other similar
postings here, I saw that typically a
# mount /dev/scsi/... /mnt/<mntpt>
seems to be the way to do it.
However, after inserting the USB stick, nothing happens. There's no
new
entry "scsi" under /dev . In fact I even manually did insmod to load
up
the usb-storage.o driver. Even after that, w/ the kernel registering
support, the /dev/scsi/... device file(s) don't show up.
Incidentally, the manual (Rev 1.3 June 2005) says that we should run
the script /usr/bin/loadUSBModules.sh . I would, if it were there! It
isn't.
So: help!
Regards,
Kaiwan.
------------------------ Yahoo! Groups Sponsor --------------------~-->
<font face=arial size=-1><a
href="http://us.ard.yahoo.com/SIG=12hqirp6o/M=362335.6886445.7839731.1510227/D=groups/S=1705005378:TM/Y=YAHOO/EXP=1124460699/A=2894361/R=0/SIG=13jmebhbo/*http://www.networkforgood.org/topics/education/digitaldivide/?source=YAHOO&cmpgn=GRP&RTP=http://groups.yahoo.com/";>In
low income neighborhoods, 84% do not own computers. At Network for Good, help
bridge the Digital Divide!</a>.</font>
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|