Hello Group:
We are able to create a simple C program and compile it using the
ARM tool chain.
The program runs fine on the target.
Our next step was to debug remotely using gdb & gdbserver.
We start the gdbserver on the target without any problem, On the
host machine we use the gdb (on cygwin !!) to connect.
First strange thing we note is that it shows "0x00000000 in ?? ()",
after connecting to the target.
I was able to "continue" and run the program, but I'm not able to
set any breakpoint or use the "next" command.
I try to load the symbol table but this does not correct the
situation.
Has anybody have success on doing a cross debugging using cygwin and
the ts 7200 ?
Many thanks.
Rodrigo.
------------------------ Yahoo! Groups Sponsor --------------------~-->
<font face=arial size=-1><a
href="http://us.ard.yahoo.com/SIG=12hdh6t0o/M=362131.6882499.7825260.1510227/D=groups/S=1705005378:TM/Y=YAHOO/EXP=1123291951/A=2889191/R=0/SIG=10r90krvo/*http://www.thebeehive.org
">Get Bzzzy! (real tools to help you find a job) Welcome to the Sweet Life
- brought to you by One Economy</a>.</font>
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|