It looks like I will finally get the go-ahead for designing an
embedded system. One of the questions we need to answer is the choice
of an LCD controller. We're looking at a graphics LCD display by
Hyundai. Hyundai will put whatever controller we spec (or none at
all) on the board. So.... What's a good choice with good linux
support? We mostly need text with some minimal graphics, and speed is
not an issue. The current controller we use has about a 2 sec. screen
update time and that has not generated any comments - but we're
experiencing about a 10% failure rate in the field over the life of
the unit, which is not good. So durability, reliability, and
maintainability are important.
Any suggestions/recommendations, either pro or con?
TIA,
--Yan
------------------------ Yahoo! Groups Sponsor --------------------~-->
<font face=arial size=-1><a
href="http://us.ard.yahoo.com/SIG=12h7k75j0/M=362335.6886445.7839731.1510227/D=groups/S=1705005378:TM/Y=YAHOO/EXP=1123258611/A=2894361/R=0/SIG=13jmebhbo/*http://www.networkforgood.org/topics/education/digitaldivide/?source=YAHOO&cmpgn=GRP&RTP=http://groups.yahoo.com/";>In
low income neighborhoods, 84% do not own computers. At Network for Good, help
bridge the Digital Divide!</a>.</font>
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|