| To: | |
|---|---|
| Subject: | [ts-7000] COM1 and Ethernet Multiplexing |
| From: | "jgalindo2" <> |
| Date: | Mon, 25 Jul 2005 22:07:58 -0000 |
I have a problem using both the COM1 serial port and the ethernet port
at the same time. I am using the sigaction and pollfd structures for
multiplexing both devices, but when there is a signal from ethernet
and then comes a signal from the serial port I read length 0 and no
data comes. But if I use Hyperterminal at the same time, I can see the
string.
What can I do?
What am I missing?
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] Re: GNU Common C, roger_cortesi |
|---|---|
| Next by Date: | Re: [ts-7000] COM1 and Ethernet Multiplexing, Jim Jackson |
| Previous by Thread: | [ts-7000] GNU Common C, roger_cortesi |
| Next by Thread: | Re: [ts-7000] COM1 and Ethernet Multiplexing, Jim Jackson |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU