ts-7000
[Top] [All Lists]

[ts-7000] USB error messages

To:
Subject: [ts-7000] USB error messages
From: "nitelitephoto" <>
Date: Wed, 13 Jul 2005 04:17:32 -0000
I have a TS-7250 and use loadUSB{Modules,}.sh to enter the
debian256-5-6-2005.tar.bz2 image.  I am concerned by two error
messages below:
1. usb_control/bulk_msg: timeout
2. cannot get config descriptor 0, Connection timed out (110)

I also noticed the first error message when I was having problems with
my USB webcam (which isn't working), though the USB disk generally works.

Here is the context:

$ loadUSB.sh
Creating extra device nodes...done.
Started device management daemon v1.3.25 for /dev
Checking root file system...
fsck 1.27 (8-Mar-2002)
e2fsck 1.27 (8-Mar-2002)
/dev/sda1: clean, 20513/74592 files, 265646/297568 blocks
Calculating module dependencies... depmod: *** Unresolved symbols in
/lib/modules/2.4.26-vrs1-cirruodepmod: *** Unresolved symbols in
/lib/modules/2.4.26-vrs1-cirrus-1-2-1-ts8/kernel/drivers/usb/catcodepmod:
*** Unresolved symbols in
/lib/modules/2.4.26-vrs1-cirrus-1-2-1-ts8/kernel/drivers/usb/usbnodepmod:
*** Unresolved symbols in
/lib/modules/2.4.26-vrs1-cirrus-1-2-1-ts8/kernel/fs/cramfs/cramfsodone.
Loading modules: usb-ohci-ep93xx fat vfat
Checking all file systems...
fsck 1.27 (8-Mar-2002)
none on /dev/pts type devpts (rw,gid=5,mode=620)
Starting hotplug subsystem: usb.
Running 0dns-down to make sure resolv.conf is ok...done.
Cleaning: /etc/network/ifstate.
Setting up IP spoofing protection: rp_filter.
Configuring network interfaces: done.
Starting portmap daemon: portmap.
Running ntpdate to synchronize clock.
Recovering nvi editor sessions... done.
Starting system log daemon: syslogd.
Starting hotplug subsystem: usbusb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
[...repeated dozens of times...]
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
cannot get config descriptor 0, Connection timed out (110)
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
[..repeated a few more times...]




 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU