[ts-7000] V4L kernel

To:
Subject:	[ts-7000] V4L kernel
From:	Philip Heron <>
Date:	Thu, 02 Jun 2005 22:39:43 +0100

Hi all,

 Been playing about with a TS-7200 for a few weeks now. One thing I've
not been able to get working yet is getting a USB camera. All the
modules needed are compiling cleanly and load without problem, but when
the camera is plugged in no driver claims it. The driver in question is
'pwc', and the camera is a QuickCam Pro 4000. I know the combination is
fine because the USB ID of the camera is listed within the driver, and
I've been using it fine for months on my main machine.

So, has anyone successfully gotten a V4L device working on a TS-7200 and
did you have to do anything unusual to get it going?

Thanks,
-Phil <>

signature.asc
Description: This is a digitally signed message part

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] V4L kernel, Philip Heron <= Re: [ts-7000] V4L kernel, Andrew Taylor Re: [ts-7000] V4L kernel, Philip Heron

Previous by Date:	[ts-7000] RedBoot source for the latest TS7250 ver?, Curtis Monroe
Next by Date:	[ts-7000] JTAG support on the TS-7200, genosensor
Previous by Thread:	[ts-7000] RedBoot source for the latest TS7250 ver?, Curtis Monroe
Next by Thread:	Re: [ts-7000] V4L kernel, Andrew Taylor
Indexes:	[Date] [Thread] [Top] [All Lists]

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU