ts-7000
[Top] [All Lists]

Re: [ts-7000] Re: rebuilding kernel

To:
Subject: Re: [ts-7000] Re: rebuilding kernel
From: Bob Lees <>
Date: Thu, 2 Jun 2005 09:37:23 +0100
Jim

try

fis del vmlinux
fis create zImage

the del and create have to refer to the current entity you are dealing with, 
which is vmlinux in flash and zImage just downloaded.

Also you will need to change the boot script using fconfig, as the current 
script loads vmlinux and now you need to load zImage, the image name you just 
saved.

Hope this helps

Bob

On Thursday 02 June 2005 02:09, jimmaiul wrote:
> Ed,
>   The Cross compiled Kernel boots (using tftp boot)! And so does
> bluetooth Rfcomm, the whole point of this excercise. It can bind
> to a cell phone with bluetooth and a GPRS modem!!!
> I'm impressed. After booting, just to make sure, uname -a shows the
> ts8 kernel name along with yesterday's date.
>
> So far I have not been able to store the kernel loaded into memory
> from tftp boot to onboard flash.
> The developer's manual shows an fis del zimage and fis create zimage
> command. The contents of flash don't change after these commands are
> issued. fis list shows  vmlinux and a few other files I don't know
> anything about.
>
> Any suggestions on how the zImage can be stored to on board flash so
> the new kernel can be booted without tftp'ing the kernel over?
>
> Thanks
> Jim
>
> --- In  "Eddie Dawydiuk" <> wrote:
> > Jim,
> >
> > >   Sorry. The link below doesn't work. The current one,
> > > debian256-10-28-2004.tar.bz2 is a ts6 image. I'm guessing the
> > > debian256-5-6-2005 was for the ts8?
> >
> > Thats correct. Try this link if you are using ts8
>
> ftp://oz.embeddedx86.com/images/debian256/debian256-5-6-2005.tar.gz.
>
> > > If I boot from the ts8 kernel just made yesterday, is there
>
> anything
>
> > > besides the /lib/modules/ that needs to be updated to make a ts8
> > > machine out of a ts6?
> >
> > Just load the kernel and copy the modules to the proper
>
> location...
>
> > //Eddie
>
> Yahoo! Groups Links
>
>
>

-- 
V +44 (0) 1296 747667
F +44 (0) 1296 747557

Diamond Consulting Services Ltd
Dinton
Aylesbury
Bucks, HP17 8UG
England


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 


<Prev in Thread] Current Thread [Next in Thread>
Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU