| To: | |
|---|---|
| Subject: | Re: [ts-7000] console on COM2 |
| From: | Kevin Russell <> |
| Date: | Wed, 30 Mar 2005 07:06:16 -0800 |
Check to be sure that /dev/ttyAM1 is in /etc/securetty.
Kevin
On Wed, 2005-03-30 at 13:51 +0000, mxbahrami wrote:
>
> Hi,
> I have a TS-7200 kit.
> I wanna use COM2 as console. I did set JP4 and change exec -
> c "/dev/ttyAM0 ..." to exec-c "/dev/ttyAM1..."
>
> but I can't login as root. shall I change something else?
>
> Thanks in advance.
> MB
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | [ts-7000] console on COM2, mxbahrami |
|---|---|
| Next by Date: | Re: [ts-7000] reading pulses in realtime, zliminator |
| Previous by Thread: | [ts-7000] console on COM2, mxbahrami |
| Next by Thread: | [ts-7000] problem in communication over COM1, mxbahrami |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU