[ts-7000] console on COM2

ts-7000

[ts-7000] console on COM2

To:
Subject:	[ts-7000] console on COM2
From:	"mxbahrami" <>
Date:	Wed, 30 Mar 2005 13:51:35 -0000


Hi,
I have a TS-7200 kit.
I wanna use COM2 as console. I did set JP4 and change exec -
c "/dev/ttyAM0 ..." to exec-c "/dev/ttyAM1..."

but  I can't login as root. shall I change something else?

Thanks in advance.
MB





 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[ts-7000] console on COM2, mxbahrami <= Re: [ts-7000] console on COM2, Kevin Russell

Previous by Date:	Re: [ts-7000] reading pulses in realtime, Ricardo Wiggers
Next by Date:	Re: [ts-7000] console on COM2, Kevin Russell
Previous by Thread:	[ts-7000] reading pulses in realtime, zliminator
Next by Thread:	Re: [ts-7000] console on COM2, Kevin Russell
Indexes:	[Date] [Thread] [Top] [All Lists]

Admin

Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU