[ts-7000] Usbserial can't open tty line

["C. Lidderdale" <>]

My setup:
  My box - full PC running Fedora C1, 192.168.0.4
  TS-7200-32 - on 192.168.0.50 stock out of the box

>From my box I telnet (root) to the 7200 and
$ mount -t nfs 192..4:/home/cal /cal
On my box as su - chroot /home/cal  with crosstools
loaded there (other questions to come).

Here's the ques/prob.  I compiled HEYU for a CM11-A
(x10 interface) cp'ed over, runs fine ... execept:
  $ heyu info
  HEYU: Can't open tty line.  Check the permissions.

$ ls -l /dev/usb
crw-rw-rw-    1 root     root     188,   0 Jan  1  1970 0
crw-rw-rw-    1 root     root     188,   1 Jan  1  1970 1

$ lsmod
Module                  Size  Used by    Not tainted
usbserial              18836   0 (unused)
usbcore                55712   0 [usbserial]

/proc/bus/usb contains nothing.
I tried pluging the CM11 into the serial port - Oh woops
think that is reserved for the console???  I added a
usb-2-serial adapter and plugged into a USB port.
Can't think of anything else.  What'da I miss?
Thanks








 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/