Make sure you change the baudrate setting to 115200, and...
"cOnfigure minicom"->"Serial Port Setup"-> Hardware Flow Control" = No.
"cOnfigure minicom"->"Serial Port Setup"-> Software Flow Control" = No.
The other settings should be correct, I waisted a lot of time on this,
my first time. (oh ya you may need to be root, depending on the device
permissions)
-Curtis.
On Sun, 2005-03-13 at 18:09, Andrew Bealing wrote:
> You'll need a cross-over cable connected to the DB-9 port. A simple
> 3-wire
> one is (usually) sufficient; i.e. join the TS-7200 Tx to the PC Rx, Rx
> to
> Tx and Gnd. Or to put it another way join pin 2 of one DB9 to pin 3
> of the
> other DB9, and vice versa, and join pin 5 straight through.
>
>
>
>
>
>
> "fouad167"
>
> < To:
>
>
> om>
> cc:
>
> Subject: [ts-7000]
> help
>
> 14/03/2005
> 11:15
>
>
> a.m.
>
> Please respond
> to
>
>
> ts-7000
>
>
>
>
>
>
>
>
>
>
>
>
> Hi
>
> I am kind of embaressed asking this question, but i am a total serial
> newbie, i just can't get minicom to work with my ts-7250.
>
> The only useful thing i did with my board is see the flashing leds
> when i connect the power
>
> i am just wondering, are there different types of db9 cables maybe my
> cable just does not connect the right pins together
>
> thanks a lot
>
> -fouad
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
>
> ###########################################################################
> This e-mail is confidential and may contain information subject to
> legal
> privilege. If you are not the intended recipient please advise us of
> our
> error by return e-mail then delete this e-mail and any attached
> files.
> You may not copy, disclose or use the contents in any way.
>
> The views expressed in this e-mail may not be those of Gallagher Group
> Ltd or subsidiary companies thereof.
> ###########################################################################
>
> Yahoo! Groups Sponsor
> ADVERTISEMENT
> click here
>
>
> ______________________________________________________________________
> Yahoo! Groups Links
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/ts-7000/
>
> * To unsubscribe from this group, send an email to:
>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms of
> Service.
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/ts-7000/
<*> To unsubscribe from this group, send an email to:
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
|