Re: [ts-7000] help

[Andrew Bealing <>]

You'll need a cross-over cable connected to the DB-9 port.  A simple 3-wire
one is (usually) sufficient; i.e. join the TS-7200 Tx to the PC Rx, Rx to
Tx and Gnd.  Or to put it another way join pin 2 of one DB9 to pin 3 of the
other DB9, and vice versa, and join pin 5 straight through.



                                                                                
                                                                    
                      "fouad167"                                                
                                                                    
                      <        To:       
                                                         
           
                      om>                      cc:                              
                                                                    
                                               Subject:  [ts-7000] help         
                                                                    
                      14/03/2005 11:15                                          
                                                                    
                      a.m.                                                      
                                                                    
                      Please respond to                                         
                                                                    
                      ts-7000                                                   
                                                                    
                                                                                
                                                                    
                                                                                
                                                                    







Hi

I am kind of embaressed asking this question, but i am a total serial
newbie, i just can't get minicom to work with my ts-7250.

The only useful thing i did with my board is see the flashing leds
when i connect the power

i am just wondering, are there different types of db9 cables maybe my
cable just does not connect the right pins together

thanks a lot

-fouad









Yahoo! Groups Links











###########################################################################
This e-mail is confidential and may contain information subject to legal 
privilege.  If you are not the intended recipient please advise us of our
error by return e-mail then delete this e-mail and any attached files.  
You may not copy, disclose or use the contents in any way.  

The views expressed in this e-mail may not be those of Gallagher Group 
Ltd or subsidiary companies thereof.
###########################################################################


 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/ts-7000/

<*> To unsubscribe from this group, send an email to:
    

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/