Erik,
Your make and make install looks good below.
Now run this
find /lib/modules/2.6.9-42.cc-i686/ -name pwc.ko
where you ought to see similar to mine (for the kernel
you are running 'uname -a'):
The new pwc driver
/lib/modules/2.6.9-42.*/kernel/drivers/usb/media/pwc.ko
The old stock pwc driver
/lib/modules/2.6.9-42.*/kernel/drivers/usb/media/pwc/pwc.ko
You need to copy the new one to the ./pwc dir as well.
Then do
rmmod pwc
modprobe pwc
lsmod | grep pwc
to unload the old if loaded, load the new, and check
if loaded and used by the video device as well.
You might also try the latest snapshot rather than the
release candidate:
http://www.saillard.org/linux/pwc/snapshots/
Peter
> > _______________________________________________
> This should be ok OR ??:
>
> pwc-10.0.12-rc1]# make
> make -C /lib/modules/2.6.9-42.cc/source
> SUBDIRS=/opt/pwc-10.0.12-rc1 modules
> make[1]: Entering directory
> `/usr/src/kernels/2.6.9-42.cc-i686'
> CC [M] /opt/pwc-10.0.12-rc1/pwc-if.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-misc.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-ctrl.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-v4l.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-uncompress.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-dec1.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-dec23.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-kiara.o
> CC [M] /opt/pwc-10.0.12-rc1/pwc-timon.o
> LD [M] /opt/pwc-10.0.12-rc1/pwc.o
> Building modules, stage 2.
> MODPOST
> CC /opt/pwc-10.0.12-rc1/pwc.mod.o
> LD [M] /opt/pwc-10.0.12-rc1/pwc.ko
> make[1]: Leaving directory
> `/usr/src/kernels/2.6.9-42.cc-i686'
>
> --
> Med venlig hilsen / Best regards
> Erik Jakobsen
>
> _______________________________________________
> pwc mailing list
>
> http://lists.saillard.org/mailman/listinfo/pwc
>
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
_______________________________________________
pwc mailing list
http://lists.saillard.org/mailman/listinfo/pwc
|