| To: | |
|---|---|
| Subject: | [pwc] No /dev/video0 after kernel upgrade to 2.6.17-1.2187_FC5 |
| From: | "Adrian D. Shaw" <> |
| Date: | Mon, 18 Sep 2006 10:22:31 +0100 (BST) |
Greetings, my first posting to the list :) I've been using the pwc driver now for some time, for my SPC 900 nc webcam, without any problems. I've just upgraded my kernel (using the standard yum update) to 2.6.17-1.2187_FC5, re-compiled the pwc module according to instructions in the INSTALL file, and suddenly there's no /dev/video0 (or /dev/video-anything). Re-booting didn't help... So I downgraded back to kernel 2.6.17-1.2174_FC5, re-compiled again, and everything's fine. Is this a problem specific to 2.6.17-1.2187, I wonder, and will it go away with the next kernel release, am I now stuck at 2.6.17-1.2174, might there be a problem with the driver, or is there another problem I've overlooked? Adrian (Aberystwyth, Wales) _______________________________________________ pwc mailing list http://lists.saillard.org/mailman/listinfo/pwc |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [pwc] Pwc module crashes on 2.6.16 kernel, Robert Rozman |
|---|---|
| Next by Date: | [pwc] SPC900NC LED light stays on all the time., Peter Baitz |
| Previous by Thread: | [pwc] My new ToUcam Pro III long exposure modification, Peter Baitz |
| Next by Thread: | [pwc] LED_FORMATTER pour SPC900 ??, Pierre Nerzic |
| Indexes: | [Date] [Thread] [Top] [All Lists] |
Disclaimer: Neither Andrew Taylor nor the University of NSW School of Computer and Engineering take any responsibility for the contents of this archive. It is purely a compilation of material sent by many people to the birding-aus mailing list. It has not been checked for accuracy nor its content verified in any way. If you wish to get material removed from the archive or have other queries about the archive e-mail Andrew Taylor at this address: andrewt@cse.unsw.EDU.AU